Installation Instructions

ManualsBrandsToro ManualsAttachmentsWindshield Kit, Workman HD/HDX/HDX-D Utility Vehicle

FormNo.3361-774RevB

FoldingWindshieldKit

forWorkman®HD/HDX,HDX-DUtilityVehicle

ModelNo.07373

InstallationInstructions

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

Note:Toattachthefoldingwindshieldkit,youmusthavethecanopykit,model07372installedonyourvehicle.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Windshield,folding

Snaponclip,windshield(10inch)

Snaponclip,windshield(2inch)

Receiverclip2

Windshieldtube1

Bolt(1/4x1-1/4inch)

Flatwasher(1/4inch)

Cappednut(1/4inch)

Installthefoldingwindshieldkit.

1.Positionthemachineonalevelsurface.Setthe

parkingbrake,turntheignitionoff,andremovethe

key.

Ifyouleavethekeyintheignitionswitch,

someonecouldaccidentlystarttheengineand

seriouslyinjureyouorotherbystanders.

Removethekeyfromtheignitionswitchbefore

youdoanymaintenance.

2.Attachthewindshieldtubetothefrontsupporttubes

onthecanopyusingtwobolts(1/4x1-1/4inch),

twoatwashers,andtwocappednuts(Figure1).

3.Removetheprotectivelmfromthewindshield.

4.Installthesnap-onclips(2and10inch)tothe

windshieldasshowninFigure1.

5.Holdtherubberclips(Figure1)andattachthetop

ofthewindshieldtothecanopyframe.

6.Attachthesnap-onclipsonthesideofthewindshield

tothecanopyframe.Aligntheclipsonthebottom

ofthewindshieldwiththewindshieldtubeandpress

thewindshieldsecurelyintoplace(Figure1).

7.Ensurethatalloftheclipsaresecuredrmlytothe

frame.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Summary of content (2 pages)

PAGE 1
Form No. 3361-774 Rev B Folding Windshield Kit for Workman® HD/ HDX, HDX-D Utility Vehicle Model No. 07373 Installation Instructions Note: Determine the left and right sides of the machine from the normal operating position. Note: To attach the folding windshield kit, you must have the canopy kit, model 07372 installed on your vehicle. Installation Loose Parts Use the chart below to verify that all parts have been shipped.
PAGE 2
Figure 1 1. Folding Windshield 2. Windshield tube 3. Bolt and flat washer 4. Capped nut 5. Canopy front support tubes 6. Snap-on clip (10 inch) Maintenance Remove the folding windshield before transporting the vehicle on a trailer. Important: To prevent degrading of the windshield or clips, clean the windshield with mild soap and water only. Do not use glass cleaners and solvents such as ammonia, alcohol, and petroleum distillates. 2 7. Snap-on clip (2 inch) 8.