Installation Instructions

ManualsBrandsToro ManualsVehiclesSteel Cargo Bed Solid Sides Kit, Workman GTX Series Utility Vehicle

FormNo.3440-162RevB

SteelCargoBedSolidSidesKit

Workman

GTXSeriesUtilityVehicle

ModelNo.07451

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Frontpanelassembly1

Leftbedsideassembly

Rightbedsideassembly1

Tailgateassembly1

Torx-headscrew(5/16x3/4inch)

Flange-headshoulderbolt(5/16x1-1/2

inches)

Button-headshoulderbolt(5/16x1/2inch)

Lanyard2

Anti-rattletailgateplug2

Installthesteelcargobedsolidsides.

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutoffthemachineandremovethekey.

g038447

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3440-162*

Summary of content (8 pages)

PAGE 1
Form No. 3440-162 Rev B Steel Cargo Bed Solid Sides Kit Workman® GTX Series Utility Vehicle Model No. 07451 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty.
PAGE 2
Installing the Steel Cargo Bed Solid Sides 1. From underneath the cargo bed, loosely secure the front panel assembly to the cargo bed using 3 torx-head screws (5/16 x 3/4 inch) as shown in Figure 2. g326404 Figure 2 1. Front panel assembly 3. Cargo bed 2.
PAGE 3
2. Loosely secure the left bed side assembly to the front panel assembly and cargo bed using 6 torx-head screws (5/16 x 3/4 inch) as shown in Figure 3. g326405 Figure 3 1. Torx-head screw (5/16 x 3/4 inch) 3. Front panel assembly 2. Left bed side assembly 4.
PAGE 4
3. Loosely secure the right bed side assembly to the front panel assembly and cargo bed using 6 torx-head screws (5/16 x 3/4 inch) as shown in Figure 4. g326406 Figure 4 1. Front panel assembly 3. Torx-head screw (5/16 x 3/4 inch) 2. Right bed side assembly 4. Cargo bed 4. Torque the 15 torx-head screws (5/16 x 3/4 inch) to 20 to 26 N∙m (15 to 19 ft-lb).
PAGE 5
. Loosely secure the tailgate assembly to the left and right bed side assemblies using the 2 flange-head shoulder bolts (5/16 x 1-1/2 inches) as shown in Figure 5. g326407 Figure 5 1. Flange-head shoulder bolt (5/16 x 1-1/2 inches) 3. Right bed side assembly 2. Left bed side assembly 4. Tailgate assembly 6. Torque the 2 flange-head shoulder bolts (5/16 x 1-1/2 inches) to 23 N∙m (17 ft-lb).
PAGE 6
7. Secure the 2 lanyards to the tailgate assembly using the 4 button-head shoulder bolts (5/16 x 1/2 inch) as shown in Figure 6.
PAGE 7
8. Install the 2 anti-rattle tailgate plugs and ensure that 1.5 mm (1/16 inch) of the plugs protrude from the tailgate-latch pin (Figure 7). 9. Trim the installation tab so that it is flush with the plug body (Figure 7). g326420 Figure 7 1. 1.5 mm (1/16 inch) 3. Anti-rattle tailgate plug 2. Trim the installation tab here. 4.
PAGE 8