2.Usingthelatch-mountbracketasthetemplate,markandthendrill2holes(5/16inch)intothedash
(Figure2).
g382255
Figure2
3.Securethelatch-mountbrackettothedashusing2torx-headscrews(M6x25mm)and2washers
(6mm)asshowninFigure3.
4.Torquethe2torx-headscrews(M6x25mm)to3.6to4.5N∙m(32to40in-lb).
g388863
Figure3
3
