Service Bulletin

Page 1 of 1

Customer Bulletin

Commercial Products

Specialty #17-02

Rear Hitch Frame Bar Wears from Implement

Product: Sand Pro/Infield Pro 3040 & 5040 August 20, 2008

Affected Units:

Sand Pro/Infield Pro 3040

Sand Pro/Infield Pro 5040

Models:

08703

08705

Serial Numbers:

260000101-280000999

Situation:

The rear Hitch Frame Bar can wear through from contact with the rear QAS attachment Lift Arm

during lifting of the implement.

Machines equipped with either the rear Tooth Rake (08751), Rear Broom (08753) or Drag Mat

Carrier (08756) should be fitted with a Lift Arm Protection

Kit (115-5607). The Kit contains a high

density plastic wear pad (for the Lift Arm) and a Frame Bar Sleeve (for the tractor if needed) that

will prevent further damage to the Frame Bar.

If the rear QAS attachments (Tooth Rake, Rear Broom or Drag Mat Carrier) already have the plastic

Wear Pad on the Lift Arm, then no additional action would be required.

Contact you local authorized Toro Commercial Product Distributor for additional information regarding

this subject.

Wear from contact

Lift Arm Protection Kit installed

Wear Pad

Frame Bar

leeve