Operator's Manual

g273202
Figure30
1.Console
3.Hose
2.Carbon-canisterlter4.Carboncanister
5.Insertanewcarbon-canisterlterintothehose
attheendofthecarboncanister(Figure30).
6.Aligntheholesinthewheelshroudwiththe
frameofthemachine(Figure29),andsecure
theshroudtotheframewith4angecapscrews
(1/4x5/8inch)thatyouremovedinstep3.
7.Assemblethetireandwheelintothestudsof
thewheelhub(Figure28)withthe4wheelnuts
thatyouremovedinstep2,andtightenthenuts
byhand.
8.Removethejackstandandlowerthemachine
totheground.
9.Torquethewheelnuts;refertoT orquingthe
WheelLugNuts(page28).
ElectricalSystem
Maintenance
ElectricalSystemSafety
•Disconnectthebatterybeforerepairingthe
machine.Disconnectthenegativeterminalrst
andthepositivelast.Connectthepositiveterminal
rstandthenegativelast.
•Chargethebatteryinanopen,well-ventilated
area,awayfromsparksandames.Unplugthe
chargerbeforeconnectingordisconnectingthe
battery.Wearprotectiveclothinganduseinsulated
tools.
Jump-StartingtheMachine
Ifyouneedtojump-startthemachine,youcanuse
thealternativepositivepost(locatedonthestarter
solenoid)insteadofthepositivebatterypost(Figure
31).
g002735
Figure31
1.Alternativepositivebatterypost
27