Operator's Manual

ReplacingtheHydraulic
Filter
ServiceInterval:Every1,000hours—Ifyou
areusingtherecommended
hydraulicuid,replacethe
hydrauliclter.
Every800hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveever
lledthereservoirwithanalternativeuid,
replacethehydrauliclter.
1.Parkthemachineonalevelsurface,shutoffthe
engine,engagetheparkingbrake,andremove
thekey.
2.Loosenthe2screwssecuringthecentershroud
tothemachineandremovetheshroud(Figure
43).
g002727
Figure43
1.Centershroud
3.Lubricatethesealinggasketonthereplacement
lterwithcleanhydraulicuid.
4.Placeadrainpanunderthehydrauliclter,
whichislocatedattheleftsideofthemachine
(Figure44).
g339957
Figure44
1.Hydrauliclter
5.Cleantheareaaroundtheltermountingarea.
Note:Havethereplacementlterwithinreach
beforeremovingtheoldlter.
6.Removethehydrauliclterfromthelterhead.
7.Installthenewhydrauliclter(Figure44)by
turningitonbyhanduntilthegasketcontactsthe
lterhead,thentightenthelter3/4turnfurther.
8.Checkthehydraulicuidlevelandaddthe
speciedhydraulicuidasneeded;referto
CheckingtheHydraulic-FluidLevel(page34)
9.Installthecentershroud.
ChangingtheHydraulic
Fluid
ServiceInterval:Every2,000hours—Ifyou
areusingtherecommended
hydraulicuid,changethe
hydraulicuid.
Every800hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveever
lledthereservoirwithanalternativeuid,
changethehydraulicuid.
Reservoircapacity:18.9L(5USgallons)
UseagenuineT orolterforreplacement;refertothe
PartsCatalogforyourmachine.
1.Removethecapfromthehydraulicreservoir
(Figure45).
35