Operator's Manual

Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Finishgrader1
Mountthenishgrader.
Nopartsrequired
–
Adjustthelinkassembly.
Nopartsrequired
–
Finishthesetup.
MountingtheFinishGrader
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
1.Removeanyattachmentfromtherearofthe
machine.
2.Backthetractionunitintopositioninfrontof
theattachmentadapter.Lowerthetractionunit
adapter.
Note:Ensurethatthelockingleverispivotedto
theleft(unlockedposition)asviewedfromthe
rearofthemachine(Figure3).
g003650
Figure3
1.Lockinglever(unlocked
position)
2.Attachmentadapter
3.Raisethetractionunitadapterintothe
attachmentadapter.
4.Pivotthelockinglevertotheright(locked
position)asviewedfromtherearofthemachine
sothatitisstandingstraightuptolockthe
adapterstogether.
AdjustingtheLink
Assembly
1.Withtheattachmentmountedandsecuredon
thetractionunit,raisetheattachment.
2.Measurethegapbetweenthetopwasher
andthespacerinthelinkassemblyonthe
attachmentadapterasshowninFigure4.
Important:Thegapbetweenthewasherand
theshouldershouldbe0.060to0.080inch
(1.5to2.0mm).
g347343
Figure4
1.Adjustmentnut
2.Jamnut
3.0.060to0.080inch(1.5to2.0mm)clearance
3