Installation Instructions

Figure4
1.Slide-lockbracket4.Flatwasher(17/32inch)
2.Clevispin—1/2x4-1/2
inches(shownbefore
insertion)
5.Dragtongue
3.Cotterpin(1/8x1inch)
2.Inserttheremainingclevispin(1/2x4-1/2inches)
throughthelowestholesoftheslide-lockbracketand
secureitwithaatwasher(17/32inch)andahairpin
cotterasshowninFigure5.
Note:Thisclevispinisinthestorageposition;learn
moreaboutitsuseintheOperationsection.
Figure5
1.Slide-lockbracket
4.Hairpincotter
2.Clevispin(1/2x4-1/2
inches)
5.Dragtongue
3.Flatwasher(17/32inch)
3.Sliptheshacklethroughthebottomlinkofthechain
andsecuretheshackletothedragtonguewitha
hex-headbolt(1/4x2-1/2inches),2spacers,anda
locknut(1/4inch)asshowninFigure6.
Figure6
1.Shackle4.Spacers
2.Locknut(1/4inch)5.Hex-headbolt(1/4x2-1/2
inches)
3.Dragtongue
6.Slide-lockbracket
4