Installation Instructions

12
InstallingtheSwitchand
Harness
Partsneededforthisprocedure:
1Harness
1
Switch
1Fuse
Procedure
1.Removethecontrolpanelfromthemachine.
2.Removetheplasticplugfromthepanelandinstallthe
switchtothepanel(Figure34).
3.Routetheharnessalongtheseathingefromtheswitch
andtotherelaypreviouslyinstalledtothevalve(Figure
32).
G003649
1234356
7
Figure32
1.Smallconnector
5.Mainharnessconnector
2.Squareconnector6.Switchconnector
3.Seathinges7.Cabletie
4.Fuseblock
4.Installtheharnesstotheswitchinthecontrolpanel
(Figure34).
5.Removethejumperwirefromthemainharnessunder
thecontrolpanel(Figure33).
Figure33
1.Mainharnessconnector2.Jumperwire
6.Installthemainharnessconnectortothemainharness
(
Figure34).
7.Installthecontrolpaneltothemachine.
G003648
123
4
5
Figure34
1.Switch4.Switchconnector
2.Screw
5.Mainharnessconnector
3.Controlpanel
Installthefuseintorightslotinthefuseblock(Figure
32).
8.Installthesquareconnectortotherelayinstallednext
withthevalve(Figure35).
9.Installthesmallconnectortothevalve(
Figure35).
10.Fastenthewireharnesstothevalvewithacabletie.
13