Operator's Manual
"
8*0 7&2/ (&4
.,85*
% # !%!" .,
The hydraulic system is designed to operate on
anti-wear hydraulic fluid. The machines reservoir is
filled at the factory with approximately 3 gallons of
Mobil 424 hydraulic fluid. -*(/ 0*9*0 3+ -;)5&80.(
+08.) '*+35* *2,.2* .6 +.567 67&57*) &2) )&.0;
7-*5*&+7*5
5384 ;)5&80.( 08.) *(311*2)*) +35
&1'.*27 7*14*5&785*6 (326.67*270; '*03: <
! 7;4* &27.:*&5 -;)5&80.( +08.)
Mobil Mobil Fluid 424
Amoco Amoco 1000
International Harvester Hy-Tran
Texaco TDH
Shell Donax TD
Union OIl Hydraulic/Tractor Fluid
Chevron Tractor Hydraulic Fluid
BP Oil BP HYD TF
Boron OIl Eldoran UTH
Exxon Torque Fluid
Conoco Power-Tran 3
Kendall Hyken 052
Phillips HG Fluid
37* The fluids within this group are interchangeable.
"" #6* 320; -;)5&80.( 3.06 64*(.+.*)
7-*5 +08.)6 (380) (&86* 6;67*1 )&1&,*
Remove cap from hydraulic oil reservoir.
Check level of oil in reservoir. Oil level should be up
to top of cone point on tank screen.
If oil level is low, slowly fill with Mobil 424 or
equivalent hydraulic oil until level is up to top of cone
point on tank screen. " $
.,85*
.0 5*6*593.5 (&4
Install reservoir cap.
"" To prevent system contamination, clean
top of hydraulic oil containers before opening. Assure
pour spout and funnel are clean.
" !!# .,
The tires are over-inflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before starting the machine.
Correct air pressure in front and rear tires is 4-6 psi.
.,85*
.5 9&09*