Installation Instructions

ManualsBrandsToro ManualsRiding ProductsBox Blade Extension Kit, Field Pro 6040

FormNo.3452-564RevA

BoxBladeExtensionKit

FieldPro6040

ModelNo.08901

InstallationInstructions

Important:YoumusthavetheMulti-ToolAttachment(Model08854)andtheBoxBladeAttachment

Holder(Model08861)installedpriortoinstallingtheBoxBladeExtensionKit.

CAUTION

TheBoxBladeExtensionKitincreasesthewidthofthemachineandcancauseinjuryto

bystandersanddamagetoproperty.

•InstalltheBoxBladeExtensionKitonlywhenintendingtouseitataworksite.

•DonottransportorstoretheBoxBladeExtensionKitwhileitisinstalledonthemachine.

WARNING

CALIFORNIA

Proposition65Warning

UseofthisproductmaycauseexposuretochemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orotherreproductiveharm.

Safety

SafetyandInstructionalDecals

Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea

ofpotentialdanger.Replaceanydecalthatisdamagedormissing.

decal133-8061

133-8061

8111LyndaleAvenueSouth

Bloomington,MN55420Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3452-564*

Summary of content (4 pages)

PAGE 1
Form No. 3452-564 Rev A Box Blade Extension Kit Field Pro 6040 Model No. 08901 Installation Instructions Important: You must have the Multi-Tool Attachment (Model 08854) and the Box Blade Attachment Holder (Model 08861) installed prior to installing the Box Blade Extension Kit. CAUTION The Box Blade Extension Kit increases the width of the machine and can cause injury to bystanders and damage to property. • Install the Box Blade Extension Kit only when intending to use it at a work site.
PAGE 2
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Prepare the machine. Left box blade extension Right box blade extension Blade scraper Plate backer Carriage bolt (3/8 x 1-1/4 inches) Locknut (3/8 inch) Stop pin 1 1 2 2 4 4 4 Install the Box Blade Extension Kit. Preparing the Machine 1. Park the machine on a level surface or move the machine to a machine lift. 2. Engage the parking brake. 3.
PAGE 3
Installing the Box Blade Extension Kit 1. Secure the blade scraper and the plate backer to the right box blade extension using 2 bolts (3/8 x 1-1/4 inches) and 2 locknuts (3/8 inch) as shown in Figure 1. Repeat the same step for the left box blade extension. Note: Loosely secure the plate backers to the box blade extensions; the fasteners will be tightened in step 5. g388603 Figure 2 1. Stop pin 3. Bracket 2. Box blade extension 3.
PAGE 4
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.