Service Manual

Traction Interlock Switch
The traction interlock switch is attached to the shift plate
at the front of the aerator (Fig. 10). The greens aerator
uses the normally open (center) and common (ground)
terminals of the switch (Fig 11).
When the gear shift lever is in
a gear, the switch plunger
is depressed and the switch should be closed (continu-
ity). When shifting gears, the switch plunger extends
and the switch should open (no continuity).
The interlock switch can be adjusted by loosening the
mounting screws and repositioning the switch.
1
2
2
Figure 10
1. Traction interlock switch 2. Mounting screw
2
4
1
3
Figure 11
1. Plunger 3. Normally open
2. Common (ground) 4. Normally
closed
Electrical System
Page 5 – 10
Greens Aerator