Service Manual

Brake Caliper Service
7
1
2
6
3
5
4
8
10
11
12
24 ft–lb
(32.5 N–m)
Anti–seize
Lubricant
Anti–seize
Lubricant
9
9. Anvil housing
10. Brake lining
11. Actuator pin
12. Cam lever
1. Adjustment pin
2. Jam nut
3. Groove pin
4. Cap screw (2 used)
Disassembly (Fig. 8)
Figure 8
5. Live side housing
6. Backing plate
7. Floating bracket
8. Lock nut (2 used)
Assembly (Fig. 8)
1. Disassemble brake caliper using Figure 8 as a guide.
NOTE: Brake lining on anvil housing side may have
adhesive to secure it to housing.
2. Clean and inspect all caliper parts after disassembly
.
Replace components that are worn or damaged.
1. Assemble brake caliper using Figure 8 as a guide
noting the following items:
A. Apply anti–seize lubricant to actuator pin and ad-
justment pin before assembly
.
B. Secure the caliper assembly by torquing the cap
screws 24 ft–lb (32.5 N–m).
C. Make sure that caliper assembly moves freely on
the floating bracket.
Chassis Page 6 – 12 Greens Aerator