Operator's Manual

18
Maintenance
✓ Safety interlock operation
✓ Brake operation
✓ Fuel level
✓ Engine oil
✓ Frame height
✓ Air Filter/pre-cleaner condition
✓ Clean the engine cooling fins
✓ Hydraulic system oil level
✓ Unusual operating noises
✓ Tine & stomper arm condition
✓ Hydraulic hoses for damage
✓ Fluid leaks
✓ Tire pressure
✓ Instrument operations
✓ Tighten loose fasteners
✓ Lubricate dampener pivots
1
✓ Lubricate all grease fittings
1
✓ Touch-up damaged paint
1
= Immediately after every washing, regardless of the
interval listed
Maintenance Procedure Maintenance Interval & Service
✝Initial break in at 8 hours
Change the engine oil filter
Service the spark plugs
Grease the wheel bearing
Grease the steering handle spindle
Check the battery fluid level
Check the battery cable connections
Check the coring head chain tension
Check the hydraulic pump belt tension
Replace safety switches
Change transaxle gear lubricant
Replace the hydraulic oil
Adjust the valves and torque the head bolts
Decarbon the combustion chamber
✝Change the engine oil
Service the air filter cartridge
Lubricate the coring head switch assembly
Service the Air Filter Pre-Cleaner
Lubricate the Dampener Pivots
Check the condition of the tines
Check the engine oil level
Every
50 hours
Every
100 hours
Every
25 hours
Every
5hours
Minimum Recommended Maintenance Intervals
Annual Recommendations:
Items are recommended every 500 hours or
one year, whichever occurs first.
Check Daily: