Operator's Manual

1
InstallingtheRearWheels
Partsneededforthisprocedure:
2Wheelassembly
Procedure
1.Removethe8lugnutssecuringtherearofthe
machinetothepackaging.
2.Mountawheelassemblyontoeachrearwheel
hub(Figure3).
g010018
Figure3
1.Wheelassembly2.Lugnut
3.Installthelugnuts(Figure3)andtightenthem
to61to75N∙m(45to55ft-lb).
4.Deatealltiresto83kPa(12psi).
2
InstallingtheHandle
Partsneededforthisprocedure:
3
Locknut(1/2inch)
1
Cableguide
2
Bolt(5/16x1/2inch)
Procedure
1.Carefullyrotatethehandletothefrontofthe
machine.Usecautionnottodamagethecables.
2.Insertthehandlemountingstudsintotheholes
inthefork(Figure4).
g010019
Figure4
1.Handle3.Locknut
2.Fork
4.Cableguide
3.Securehandlestudstofork(Figure4)with3
locknuts(1/2inch).
4.Insertthecableguidearoundthecables.
5.Mountthecableguidetothetopofthefork
(Figure4)with2bolts(5/16x1/2inch).
10