Operator's Manual

g010028
Figure61
1.Hydraulic-tankcap
4.Removethedipstickfromthellerneckand
wipeitwithacleanrag.Insertthedipstickinto
thellerneck;thenremoveitandcheckthe
leveloftheuid.Theuidlevelshouldbeupto
themarkonthedipstick(Figure62).
g010029
Figure62
1.Dipstick2.Fullmark
5.Ifthelevelislow,addthespeciedhydraulic
uidtoraisetheleveltothefullmark.
6.Installthedipstickandcapontothellerneck.
ChangingtheHydraulic
FluidandFilters
ServiceInterval:Aftertherst8hours
Every200hours
Hydraulicreservoircapacity:approximately6.6L
(1.75USgallons)
Important:Donotsubstituteautomotiveoillters
orseverehydraulicsystemdamagemayresult.
Note:Removingthereturnlterdrainstheentire
uidreservoir.
1.Parkthemachineonalevelsurface,shutoffthe
engine,engagetheparkingbrake,andremove
thekey.
2.Placeadrainpanunderthelters,removethe
oldlters,andwipethelteradaptergasket
surfaceclean(Figure63).
g010060
Figure63
1.Hydraulicreturnlter2.Hydraulicchargelter
3.Applyathincoatofhydraulicuidtotherubber
gasketonthereplacementlters.
4.Installthereplacementhydraulicltersontothe
lteradapters.Turneachlterclockwiseuntil
therubbergasketcontactsthelteradapter,
thentighteneachanadditional1/2turn.
5.Addthespeciedhydraulicuiduntiltheuid
levelisattheFullmarkonthedipstick,referto
CheckingtheHydraulic-FluidLevel(page45).
6.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.Shutofftheengine
andremovethekey,andcheckforleaks.
7.Checktheuidlevelagainwhiletheuidis
warm.Addthespeciedhydraulicuidtoraise
theleveltotheFullmarkonthedipstick,if
required.
Note:Donotoverllthehydraulicreservoir
withuid.
46