Operator's Manual

14
Secure Rear Hood
(Required for CE)
1. Secure the hood plate to the rear hood with (3) pop
rivets (Fig. 7).
2. Thread a #10 nut onto a #10 x 2 inch capscrew.
3. Insert the capscrew thru the hood plate (Fig. 7).
1
Figure 6
1. Rear hood
1
3
2
Figure 7
1. Hood plate
2. Pop rivet
3. Capscrew & nuts
4. Secure the capscrew to the hood plate with a # 10
locknut (Fig. 7).
Secure Belt Cover
(Required for CE)
1. Insert a 1/4 x 1 inch capscrew thru the belt cover latch
lever and secure with a 1/4 locknut (Fig. 8 & 9).
1
2
Figure 8
1. Belt cover 2. Latch lever
1
2
Figure 9
1. Latch lever 2. Capscrew & nut
Install Tine Holders, Turf
Guards and Tines
A wide selection of tine holders, turf guards and tines are
available for the aerator. Refer to page 22 for the
installation instructions.