Operator's Manual

g010060
Figure60
1.Hydraulicreturnlter2.Hydraulicchargelter
3.Applyathincoatofhydraulicuidtotherubber
gasketonthereplacementlters.
4.Installthereplacementhydraulicltersontothe
lteradapters.Turntheeachlterclockwise
untiltherubbergasketcontactsthelteradapter,
thentighteneachanadditional1/2turn.
5.AdduidtotheFullmarkonthedipstick,referto
CheckingtheHydraulicFluid(page18).
6.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.Shutofftheengine
andremovethekey,andcheckforleaks.
7.Checkthelevelagainwhiletheuidiswarm.
AdduidtoraisetheleveltotheFullmarkon
thedipstick,ifrequired.Donotoverll.
HydraulicSystemTest
Ports
Thetestportsareusedtotestthepressureinthe
hydrauliccircuits.ContactyourlocalTorodistributor
forassistance.
•TestPortG2(Figure61)isusedtoassistin
troubleshootingthetractionchargecircuit.
g010061
Figure61
1.TestportG22.TestportG1
•TestPortG1(Figure61)isusedtoassistin
troubleshootingtheliftcircuitpressure.
44