Operator's Manual

19
Troubleshooting
Problem Cause Solution
Irregular hole pattern Forward speed not constant.
Engine speed not constant.
Belt slippage
Set hydro-control.
Set hand throttle
Adjust belt tension
Machine bounces Ground too hard
Subsurface debris
Working too deep
Irrigate
Reduce working depth
Reduce depth
Slotted holes Ground too wet & soft
Too fast forward speed
Incorrect top link length
Wait
Reduce gear & reduce
spacing
Try shortening top link
Hollow tines blocking Are you using genuine
tines?
Too wet for soil type
Using wrong tines
Call your Toro dealer
Wait
Call your Toro dealer - Use
side eject tines
Belts slipping Loose belts Remove link
Specifications
SPECIFICATIONS MC10 MC15 MC20
Work Width (cm) 100cm 150cm 200cm
Overall Width (cm) 128cm 178cm 228cm
Overall Length (cm) 98cm 98cm 98cm
Overall Height (cm) 98cm 98cm 98cm
Number of Tine Heads 4.0 6.0 8.0
Weight (Kg) 400Kg 525Kg 650Kg
PTO Speed (RPM) 540.0 540.0 540.0
Power requirement HP/KW 16/11.5 24/17.5 32/23
Hitch Category CATEGORY 1 CATEGORY 1 CATEGORY 1
Min/Max Depth (mm) 0–125mm 0–125mm 0–125mm
FIGURES ABOVE EXCLUDE WINDROWER ATTACHMENT