Operator's Manual

27
IDENTIFICATION AND ORDERING
MODEL AND SERIAL NUMBERS
The Aerator has two identification numbers: a model
number and a serial number. The two numbers are
stamped on a pIate which is riveted to center frame
plate, under hood (Fig. 36). In any correspondence
concerning the aerator, suppIy model and serial
numbers to be sure that correct information and
repIacement parts are obtained.
1. Model & serial number plate
Figure 36
1
To order repIacement parts from an authorized TORO
Distributor, supply the following information:
1. Model and serial numbers of the machine.
2. Part number, description and quantity of parts
desired.
Note: Do not order by reference number if a parts
cataIog is being used; use the part number.