Operator's Manual

g007295
Figure10
ProCore864
1.LowerPTOshield3.Screw
2.Clipnut
2.AssemblethePTOdriveshafttothegearbox
inputshaftofthemachine(Figure11)withabolt
(1/2x3.00inches)andanut(1/2inch).
g007296
Figure11
1.Gearboxinputshaft
4.Bolt
2.Nut
5.PTOdriveshaft
3.PTOshaftcoupler
3.AssemblethePTOdriveshafttothePTOoutput
shaftofthetractionunit.
g007328
Figure12
1.PTOoutputshaft(traction
unit)
3.PTOdriveshaft
2.PTOshaftcoupler
4.SlidethePTOdriveshaftforwardasfarasthe
PTOoutputshaftallows.
5.PullbackonthelockingcollarofthePTOshaft
couplertosecurethePTOdriveshaft.Slidethe
PTOdriveshaftbackandforthtoensurethatit
islockedsecurely.
6.OnCEmodelsonly,connectthesafetychains
fromthedriveshaftguardstotheweldedclipson
thelinkarms.Makesurethatthechainsremain
slackwhenthemachineisraisedorlowered.
7.OntheProCore864,installthelowerPTOshield
tothemachine.
8.Verifythatthetelescopingtubehasaminimum
of76mm(3inches)overlapwhenthemachine
israisedtothemaximumheight.
Tochecktheoverlap,measurethedistance
betweentheendshields,asshowninFigure
13.Thisdimensionmustnotexceed406mm
(16inches).Ifso,movethelowerliftpinstothe
uppersetofholesbeforeoperatingthemachine.
g007297
Figure13
1.406mm(16inches)
12