Operator's Manual

g007329
Figure15
1.Level
3.Ifprovided,turntheadjustablelinkbodytoraise
orlowerthelinkarmuntilthemachineisleveled
side-to-side.
Note:Refertothetractionunitoperator's
manualforadditionaladjustmentprocedures.
7
AdjustingtheRoller
Scraper
NoPartsRequired
Procedure
Adjusttherollerscrapersothatthereisagapof
approximatelya1to2mm(0.06to0.09inch)between
thescraperandtheroller.
1.Loosenthefastenerssecuringeachendof
scrapertorollerscrapertab(Figure16).
g007330
Figure16
1.Rollerscraper2.Nut
2.Slidetherollerscraperinoroutuntiltherequired
positionisattained,andtightenthefasteners.
3.OntheProCore864only,youcanadjustthe
stopboltonthecentersupporttoattainthe
propergap.
8
InstallingtheTineHeads
andtheTines
NoPartsRequired
Procedure
Awideselectionoftinesandtineheadsareavailable
forthemachine.Choosethetinetype,size,and
spacingsrequiredforthejob.Installthetineheadand
tinespertheInstallationInstructionssuppliedwith
eachtinekit;refertoProCore864tineconguration
tableandProCore1298tinecongurationtablein
Attachments/Accessories(page18).
Important:Neveroperatethemachinewithout
thetineheadsinstalled.Thearmsmaymove
excessivelyanddamagetheframeofthemachine.
9
InstallingtheTurfGuards
Partsneededforthisprocedure:
–
Turfguards(notincluded)
Procedure
Awideselectionofturfguardsisavailableforthe
machine.Usetheappropriateturfguardsforthe
selectedtineheads.
1.Loosenthenutssecuringtheturfguardclamps
totheturfguardtoolbar(Figure17).
14