Operator's Manual

3.Waitforallmovingpartstostopbeforeleavingthe
operatingposition.
4.Cleanaroundtheoildipstick(Figure47)sothatdirt
cannotfallintothellerholeanddamagetheengine.
Figure47
1.Oildipstick
2.Fillertube
5.Removetheoildipstickandwipetheendclean(Figure
47).
6.Slidetheoildipstickfullyintothellertube(Figure47).
7.Pullthedipstickoutandlookattheend.Iftheoillevel
islow,slowlypouronlyenoughoilintothellertube
toraisetheleveltotheFULLmark.
Important:Donotoverllthecrankcasewithoil
andruntheengine;enginedamagecanresult.
ChangingtheOil
ServiceInterval:Aftertherst8hours
Every100hours
1.Starttheengineandletitrunveminutes.Thiswarms
theoilsoitdrainsbetter.
2.Parkthemachinesothatthedrainsideisslightly
lowerthantheoppositesidetoensuretheoildrains
completely.
3.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
4.Placeapanbelowthedrainplug(Figure48).
5.Removetheoildrainplugallowingtheoiltodraininto
thepan.
6.Whenoilhasdrainedcompletely,installthedrainplug.
Note:Disposeoftheusedoilatarecyclingcenter.
Figure48
1.Oildrainplug
7.Slowlypourapproximately80%ofthespeciedoil
intothellertube(Figure47).
8.Checktheoillevel;refertoCheckingtheEngineOil
Level.
9.SlowlyaddtheadditionaloiltobringittotheFull
mark.
ChangingtheOilFilter
ServiceInterval:Every200hours
Note:Changetheoilltermorefrequentlywhenthe
operatingconditionsareextremelydustyorsandy.
1.Draintheoilfromtheengine;refertoChangingthe
EngineOil.
2.Removetheoldlterandwipethelleradaptergasket
surface(Figure49).
Figure49
1.Oillter
3.Adapter
2.Adaptergasket
3.Pournewoilinthroughthecenterholeofthelter.
Fillituptothebottomofthethreadsinside.
4.Allowtheltermaterialtoabsorbthenewoilfor1
to2minutes.
5.Applyathincoatofnewoiltotherubbergasketon
thereplacementlter(Figure49).
6.Installthereplacementoilltertothelteradapter,
turntheoillterclockwiseuntiltherubbergasket
contactsthelteradapter,thentightenthelteran
additional2/3to1turn(Figure49).
37