Operator's Manual

g022019
3
2
1
Figure44
Topview
1.Bolt(3/8x1inch)3.Sensorholder
2.Sensor
g022020
1 2
3
Figure45
Bottomview
1.Plasticblockinthe
tine-alignmenttool
3.Tine
2.Nut(3/8inch)
8.Tightenthealignmentboltsto3.4N-m(30ft-lbs)in
thefollowingorder(Figure41):
A.Tightenthecenterbolt.
B.Tightenthetwosidebolts.
Note:Ensurethetwoside-boltheadsdirectly
contacttheadjacentbracket;refertoFigure41.
9.Removethenutandboltholdingthesensorholder
inplaceandcarefullyrotatethesensorholderinto
position(Figure44andFigure45).
10.Measurethedistancebetweentheframeandthe
leftedgeofthetine-alignmenttool,andwritethat
dimensiononthetine-alignmenttool.
11.Removethetine-alignmenttoolfromthemachine
frame(Figure42).
12.Placethetine-alignmenttoolandhardwareintothe
toolbox.
28