Installation Instructions

FormNo.3364-572RevA
RearRollerKit
forProCoreSR75–HDAerator
ModelNo.09955
InstallationInstructions
Installation
1.Looselymountabearingtoeachrollerarmwith2
boltsandlocknuts(Figure1).Makesurethebearing
ispositionedontheoppositesideofthearmas
theweldedstopandwiththegreasettingpointing
upward.
Figure1
1.Rollerarm
5.Spacer
2.Bearing6.Roller
3.Bolt7.Locknut
4.Locknut
2.Insertaspacerontoeachendoftherollershaft
(Figure1).
3.Insertthespacersandrollershaftsintotheroller
armsandbearings(Figure1).Tightenthebearing
boltsandnuts.
4.Securetherollershaftstotherollerarmswith
locknuts(
Figure1).
5.Tightenthesetscrewssecuringthebearingstothe
rollershafts.
6.Secureeachrollerarmtotheframewithabolt,
(2)washers,abushingandanut.Positionthe
componentsasshowninFigure2.
Figure2
1.Bolt4.Bushing
2.Washer(2)
5.Nut
3.Rollerarm
7.Mountachaintoeachrollerarmtabwithaange
headscrewandanut(Figure3)
8.HookthechainQuickLinksintotheframeholesas
shownin
Figure3.
Figure3
1.ChainwithQuickLink
4.Rollerarmtab
2.Hookchainhere5.Bolt
3.Nut
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved