Installation Instructions

Printed in the USA

 2001 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Form No. 3326–123

Installation

Instructions

Part No. 100–1350

Wide Tire Kit

Groundsmaster  3000D, 82” Contour Deck

1. Lower cutting unit to ground, shut the engine off and

engage the parking brake.

2. Jack up front or rear of machine so tires are off the

ground. Support machine with jack stands.

3. Remove standard tire from wheel hub.

4. Install new wide tire and torque lug nuts to 80 ± 10

ft–lbs.

5. Inflate tire to 18 psi.

6. Repeat procedure on remaining tires.

Figure 1

Front

Rear