Installation Instructions

5. Rotate the leftside of bumper up to gain access

to drill holes on front leftside of bumper (Fig. 9).

6. Drill two 11/32” holes onto the front of

bumper (Fig. 9). Remove template.

7. Reinstall the bumper to machine frame.

m-4574

Figure 9

1. Template

#3 (Folded)

2. T

emplate Position on

Bumper

3. 1

1/32” Diameter Holes to

be drilled

Leftside of Bumper

Installing

Air Cleaner Bracket

1. Align holes in bracket with holes drilled in the

left front of bumper.

2. Install 5/16I bolts into holes and tighten

(Fig. 10).

Note: Install bolts with heads towards the

rear of the machine.

M-4569

Figure 10

1. Air

Cleaner Bracket

2. Bolt

3. Nut

Drilled Holes