Operator's Manual

G006236
1
1
2
2
3
3
4
4
Figure16
1.Yellow3.White
2.Black,Ground4.Black,Ground
12.Securetheconnectortothewireharnessbysnapping
theconnectorshutoverthewires.
13.Attheloaderarm,installtheharnessbracketas
showninFigure17.Loosenthejamnutontheright
hydrauliclineandinstallthebracketbetweenthenut
andtheloaderarmbracket.Securethebracketby
tighteningthenuttoholditagainsttheloaderarm
bracket.
G006307
1
2
1
Figure17
1.Harnessbracket2.Jamnut,hydraulicline
14.Usetheclipontheconnectortosecuretheharness
tothebracketpreviouslyinstalledontotheloader
armhydrauliclines.
4
InstallingtheLoader
Arm/AttachmentTiltLever
Partsneededforthisprocedure:
1
Loaderarm/attachmentlever
Procedure
1.Installthenewloaderarm/attachmenttiltleverto
themachine(Figure18).Screwtheshaftdownfully
intothevalve,withtheshaftleadopeningfacing
rearward(awaythecontrolpanelassembly)andthe
solenoidswitchesinahorizontalplane.
G006237
1
2
Figure18
1.Loaderarm/attachment
lever
2.Shaftleadopening
Note:Positioningofthesolenoidswitchescanbe
adjustedbylooseningtheupperlocknutontheshaft
andtwistingthelevertothecorrectposition.While
holdingtheleverfromrotating,tightentheupper
locknutsecurely.
2.Holdingthetiltleverfromrotating,tightentheshaft
locknutsecurelydownonthespoolvalve.
3.Looptheshaftleadclockwisearoundthespoolvalve
(Figure19).
Note:Loopingtheshaftleadaroundthespoolvalve
mustbedonetopreventtheleadfromcontacting
thetractioncontrollinkages.
11