Installation Instructions

2
5. Secure the end of the cable coming out of the bottom
of the blade to a post or have someone hold it.
6. Begin plowing while routing the cable over the plow
and into the blade (Fig. 3).
m–4909
Figure 3
7. When finished, remove the plow from the soil and
remove the cable from the blade.
Cleaning the Blade
After each use, clean the blade as follows:
1. Remove the large wingnut and bolt from the top of the
blade (Fig. 2).
2. Pull the cable guide out of the blade (Fig. 2).
3. Wash out the inside of the chute with water to remove
any dirt.
4. Wash the rest of the blade.
5. Install the cable guide and secure it with the wingnut
and bolt (Fig. 2).