Installation Instructions

1
All Rights Reserved
Printed in the USA
2001 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Horn Kit
Workman
1100/2100 and Twister Utility Vehicle
Part No. 104-6663
Form No. 3326-973
Installation Instructions
Loose Parts
Description Qty. Use
Horn
U-bolt
Locknut, 3/8 in.
Plate
1
1
2
1
Installing the horn
Harness
Horn button
1
1
Installing the harness
Decal 1 Attach to the dash panel.
Certificate of compliance 1
Installation Instructions 1 Assembling the Horn Kit
Attaching the Horn
1. Position the machine on a level surface. Set the
parking brake, stop the engine, and remove the key.
If you leave the key in the ignition switch,
someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition switch before
you do any maintenance.
Caution
2. Remove the hood from the vehicle by removing the 2
screws in the top of the hood, the 2 bolts on each
fender, and the 4 bolts from the bottom of the hood.
3. Attach the horn to the frame channel with the U-bolt,
plate, and locknuts (Fig. 1).
m–5674
1
2
3
4
4
Figure 1
1. Horn
2. U-bolt
3. Plate
4. Locknut

Summary of content (2 pages)