Installation Instructions

1.Runthewireharnessfromthehornbutton,under
thedashpanel,throughthewireaccessholeinthe
oorboard,andthroughtheframehooksalongside
oftheheadlightwireharnesstotheelectricalpanel
locatedundertheoperator’sseat.
2.Undertheoorboard,connectthewireharnessto
thenewbrakeswitch.Securetheharnesstothe
switchusingaplasticwiretie.
3.Undertheoorboard,connectthetwoquick
connectterminalstothehorn.
4.Undertheoperator’sseat,connectthesingleblack
wire(ground)inthemiddleofthewireharnessto
thegroundblock(
Figure18)locatedundertheseat
neartothesolenoid.
Note:Rightandleftsidesaredeterminedfromthe
normaloperatingposition.
Figure18
1.Redpowerwirefromthe
wireharness.
3.Blackwiretogroundblock
2.Solenoid,rightsideas
determinedbyoperating
position
5.Connecttheredpowerwiretotherightsideofthe
solenoid(
Figure18),locatedundertheseat.
Note:Connectingthewireharnesstotherightside
solenoidpostwillallowthehorntobeactivewhen
theignitionkeyisintheOffposition.
6.Runthewireharnessendwiththetaillightconnector
alongtheleftsideoftheframetowardtherearof
themachine.
7.Connectthetaillightconnectoronthewireharness
tothetaillight(Figure19andFigure20).
Formachineswithserialnumbers259999999
andlower
Figure19
1.Taillight2.Pigtailconnector
Formachineswithserialnumbers260000001
andhigher.
Figure20
1.Taillight2.Pigtailconnector
8.Tiethewireharnessdowntotheframealongwith
theexistingwiring.
Note:Makesuretheharnessdoesnottouchany
partoftheengineexhaustsystem.
10