Installation Instructions

1
InstallingtheFanGuard
Partsneededforthisprocedure:
1Fanguard
4
Carriagebolt(5/16x3/4inch)
4
Flangenut(5/16inch)
Procedure
Thefanguardistobeinstalledunderthecenterconsole.
1.Rotatebothseatsforward.
2.Removethetwoboltsandnutsfromthecenter
console(Figure1).
Figure1
1.Centerconsole4.Carriagebolt(5/16x3/4
inch)
2.Fanguard5.Fan
3.Flangenut(5/16inch)
3.Positiontheguardunderthecenterconsoleand
abovethefan(Figure1).
4.Installthefanguardtothecenterconsolewithfour
carriagebolts(5/16x3/4inch)andfourangenuts
(5/16inch)(Figure1).
2
DrillingtheHolesfortheHorn
Components
NoPartsRequired
Procedure
Notallmachineswillneedpreparationforthe
installationofthehornandhornbutton.Inspectthe
locationsdescribedintheprocedureandverifythe
necessityfordrillingholesatthelocationbeforealtering
themachine.
1.Locatetheclutchplateundertheoorboard
(
Figure2).
Figure2
1.Clutchplate3.Rightfronttire
2.Holestodrill
2.Todrillholesforthehorn,measureandmarkthe
holesasshowninFigure2.
3.Drilltwo8mmdiameterholesintheclutchplate
(Figure2).
4.Tolocatetheholeforthehornbutton,measure8.6
cm(3-3/8inches)totheleftofthesteeringcolumn
baseand3.8cm(1-1/2inches)fromthecenterof
thedashscrewhead(Figure3).
3