Installation Instructions

Printed in the USA

W 2005 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Hour Meter Kit

Toro Line Painter 1200

Part No. 107–0571

Form No. 3353–686 Rev A

Installation Instructions

1. Remove the knock–out plug from the control panel

(Fig. 1).

Figure 1

1. Knock–out plug

2. Locate the single wire w/connector extending from the

wire harness under the control panel.

3. Insert the hour meter retainer onto the wire positioning

as shown in figure 2.

4. Plug the wire connector onto the hour meter connector.

5. From the top of the control panel, press the hour meter

into the mounting bracket (Fig. 2).

6. Install the hour meter retainer to the back of the hour

meter (Fig. 2).

Figure 2

1. Hour meter

2. Hour meter retainer

3. Wire w/spade connector