Installation Instructions

1
 2003 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Contact us at www.Toro.com
All Rights Reserved
Printed in the USA
French Decal Kit
TimeCutter

Z Riding Mowers
Part No. 107–2492
Form No. 3350–388
Installation Instructions
Installing the Decals
Install the decals in the positions indicated in the table
below. Place each French decal directly over the
corresponding US English decal, unless noted in the table.
Install each decal as follows:
1. Thoroughly clean the area where you will install the
decal.
2. Dampen the area with water or mildly soapy water.
3. Peel the decal from the backing and install it in place.
4. Squeegee across the surface of the decal, starting at the
center of the decal and working toward the edges, using
overlapping strokes.
Location
US English French
On right-hand top
of mower deck
of
mower
deck
68–3650 93-7009
This is for 38 inch
(96 cm) and
42 inch (107 cm)
mowers only.
On left
-
hand to
p
On
left
-
hand
top
of mower deck
68–3660 93-6677
This is for 38 inch
(96 cm) and
42 inch (107 cm)
mowers only.
On left-hand top
of mower deck
Remove
79
–
3140 and
79
–
3140
an
d
then apply
93–7010 .
79–3140 93-7010
This is for 44 inch
(112 cm) mowers
only.
On the top of the
left side of the
mower deck,
remove 92–7108
and then apply
93–7010.
Remove
92–7108 on the
grass deflector.
92–7108 93-7010