Installation Instructions

Printed in the USA

 2004 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Groomer Quick Up Kit

Greensmaster



Flex 21

Part No. 107–8101

Form No. 3352–642

Installation Instructions

1. Remove the roll pin securing the adjusting screw to the

lift arm assembly (Fig. 1).

2. Unthread the adjusting screw from the lift arm

assembly (Fig. 1).

Figure 1

1. Roll pin

2. Adjusting screw

3. Lift arm assembly

3. Insert the new lift arm onto the adjusting nut (Fig. 2).

The lift arm and set screw hole are to be positioned

forward.

Figure 2

1. Lift arm

2. Lift arm assembly nut

3. Adjusting screw

4. Roll pin

5. Set screw

4. Thread new adjusting screw into lift arm assembly

(Fig. 2).

5. Secure the adjusting screw to the lift arm assembly

with a roll pin (Fig. 2).

6. Apply Loctite to the set screw and secure the lift arm

to the adjusting nut (Fig. 2).

7. Repeat the procedure on the opposite end of groomer.

8. Rotate the lift arms up to raise the groomer.

PAGE 1
Form No. 3352–642 Groomer Quick Up Kit Greensmaster Flex 21 Part No. 107–8101 Installation Instructions 1. Remove the roll pin securing the adjusting screw to the lift arm assembly (Fig. 1). 1 3 2. Unthread the adjusting screw from the lift arm assembly (Fig. 1). 2 2 4 5 Figure 2 1. Lift arm 2. Lift arm assembly nut 3. Adjusting screw 3 1 4. Thread new adjusting screw into lift arm assembly (Fig. 2). Figure 1 1. Roll pin 2. Adjusting screw 4. Roll pin 5. Set screw 3. Lift arm assembly 5.