Installation Instructions

5
1
2
3
4
5
6
7
8
9
To Valves
To suction hose
Figure 9
1. Pump
2. Hoses to valve (2)
3. 90_ fitting (2)
4. Straight fitting (2)
5. Adapter
6. Straight fitting
7. Elbow fitting (2)
8. Suction hoses to manifold
tube (2)
9. Manifold tube
20. At the approximate location shown in figure 10, mark
and cut the arm off the old manifold tube. Remove any
burrs or sharp edges from the manifold tube arm.
1
2
Figure 10
1. Manifold tube arm 2. Cut here
21. At the approximate location shown in figure 8, mark
and cut the suction hose into two pieces.
22. Insert the manifold arm into the newly exposed hose
ends (Fig. 11). Clamp the hose ends to the manifold
arm with the clamps previously removed.