Installation Instructions

InstallingtheBafes
1.Removethe9screwsandnutsfromthemounting
holesprovidedinthefrontofthedeck.
Note:Iftheholesarenotinthedeck,locate,mark,
anddrill7holes(0.344inch(9mm)diameter)inthe
frontofthedeck,usingthedimensionsshownin
Figure1.
2.Looselysecuretheright,center,andleftbafes
totheinsideofthedeckwiththescrewsandnuts
previouslyremoved,positioningthemasshownin
Figure1.
Note:Ifnotprovided,use5/16x3/4inchange
headscrewsand5/16inchnuts.
3.Adjustthebafestothedesiredheightandtighten
themountingfasteners.
Note:Makesurethebafesarelevelandnotbent.
Abentbafecouldaffectthequalityofcut.
4
G01 1649
1
2
3
4
5
6
7
8
9
10
10
11
12
13
6
Figure1
Refertothisgurethroughouttheinstallation.
1.Leftdeckbafe5.Screwandwashers9.6.50inches(16.5cm)13.2.00inches(5cm)
2.Centerdeckbafe6.4.12inches(10.5cm)10.1.25inches(3.17cm)
3.Rightdeckbafe7.13.38inches(34cm)11.10.88inches(27.63cm)
4.Deckcovers
8.7.88inches(20cm)12.18inches(45.72cm)
SecuringtheDeckCovers
1.Loosentheknobsandremovethedeckcoversfrom
thedeck.
2.Oneachsideofthegearbox,removetheknob,
washer,andlocknutsecuredtothedeckmounting
tab.Discardtheknobbutretainthewasherand
locknut.
3.Looselyinstallanewbolttoeachdeckmountingtab
withthewasherandlocknutpreviouslyremoved.
4.Installthedeckcoversandtightenthenewboltsand
theexistingknobs.
2