Installation Instructions

2
Note: Mounting holes and clinch nuts may already be in
deck.
Mount Baffles
1. Remove deck from traction unit, remove deck covers
and turn deck over.
2. On each deck strap, inside front of deck, measure
1.12” from bottom lip of deck and scribe a line the full
length of each strap (Fig. 1 & insert).
3. Position baffles inside deck aligning mounting holes
with scribed lines on straps.
4. Using baffles as templates, locate, mark and drill (8)
.531” dia. holes in deck straps.
5. Install a clinch nut in each hole.
6. Loosely secure baffles to deck straps with flange head
capscrews, positioning them as shown in figure 2.
7. Adjust baffles to desired height and tighten mounting
fasteners.
Note: Make sure baffles are level and not bent. A bent
baffle could affect the quality of cut.
1
1.12”
12
Side View
Figure 1
1. Deck straps 2. Deck