Installation Instructions

3
Secure Deck Covers
1. Remove deck covers.
2. Using dimensions shown in figures 3 & 4, locate, mark
and drill a .438” dia. hole in each deck cover.
3. Reinstall each cover to deck.
4. Using each deck cover as a template, locate and mark
hole locations in deck channel.
5. Remove deck covers and drill (4) .531” dia. holes at
locations marked.
6. Install a clinch nut in each hole.
7. Reinstall deck covers and secure each to deck with a
flange head capscrew.
1
2
3
3
1
Figure 2
1. Side deck baffle 2. Center deck baffle 3. Deck covers