Installation Instructions

3
13. Loosely mount the side of the R.H. foot shield to the
right rear corner of the cutting unit with (2) 5/16 x 3/4
in. lg. carriage bolts and flange nuts. Position the
shield and the fasteners as shown in figure 5.
14. Loosely mount the top of the foot shield to the cutting
unit with a 5/16 x 1–1/4 in. lg. carriage bolt and flange
nut. Position the fasteners as shown in figure 5.
1
2
3
Figure 5
1. R.H. foot shield
2. 5/16 x 3/4” carriage bolt
3. 5/16 x 1–1/4” carriage bolt
15. Tighten fasteners.
16. Mount the rear deflector to the rear of the cutting unit
with (3) 5/16 x 1–1/4 in. lg. carriage bolts and flange
nuts. Position the deflector as shown in figure 6.
1
Figure 6
1. Rear deflector
17. Rotate the blades to make sure there is no interference.
18. Reinstall the covers to the top of the deck.
19. Remove the blocks and lower the deck.