Installation Instructions

8. Install 2 fang ed elev ator bolts (5/16 x 1 inc h), flat
w ashers and loc kn uts (5/16 inc h) into the liner and
the blo w er ( Figure 2 ).
Figure 2
1. Blower 3. Nut, 5/16 inch
2. Fanged elevator bolt, 5/16
x 1 inch
4. Impeller
9. Using a bloc k of w ood, push the liner do wn to w ard
the front of blo w er , until the blo w er liner tightly
confor ms to the inside of the blo w er ( Figure 3 ).
T his will pro vide clearance betw een the impeller
and the liner .
10. W hile holding the liner , tighten the 2 top bolts in
the liner and the blo w er ( Figure 3 ).
11. R otate the blo w er pulley to v erify that the blo w er
fan does not hit the liner ( Figure 3 ). Adjust the
liner if necessar y .
Figure 3
1. Blower 3. Wood block
2. Top bolt and nut
2