Installation Instructions

Printed in the USA

 2005 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Seat Kit

Reelmaster 4000

Part No. 108–4447

Form No. 3352–649

Installation Instructions

1. Disconnect the seat switch harness from the traction

unit harness.

2. Remove the retainer clip from the seat lock rod.

3. Raise the seat and support it with the seat support rod.

4. Remove the (4) nuts securing the seat to the seat plate.

Remove the seat.

5. Using the dimensions shown in figure 1, locate, mark

and drill (4) slots into the seat plate.

6. Plug the new wire harness into the seat connector.

7. Mount the new seat to seat plate with (4) nuts.

8. Plug the wire harness into the traction unit wire

harness connector.

9. Lower the seat and secure the retainer clip to the seat

lock rod.

7/16” Dia. x 5/8” Slot (4)

11–1/4”

5–5/8”

Figure 1

PAGE 1
Form No. 3352–649 Seat Kit Reelmaster 4000 Part No. 108–4447 Installation Instructions 1. Disconnect the seat switch harness from the traction unit harness. 6. Plug the new wire harness into the seat connector. 7. Mount the new seat to seat plate with (4) nuts. 2. Remove the retainer clip from the seat lock rod. 3. Raise the seat and support it with the seat support rod. 8. Plug the wire harness into the traction unit wire harness connector. 4. Remove the (4) nuts securing the seat to the seat plate.