Installation Instructions

3
12. Slip the wire loop on the discharge tunnel over the outer
end of the door hinge (Figs. 8 and 9).
m–7837
1
2
3
Figure 8
1. Wire loop
2. Outer end of door hinge
3. Door
m–7838
1
Figure 9
1. Outer end of door hinge in wire loop
13. Install the bracket on the discharge tunnel with 2 bolts
provided in the kit (Fig. 10).
m–7840
1
2
Figure 10
1. Bracket 2. Bolt (2)
14. The new discharge tunnel should appear on the mower
housing as shown in Figure 11.
m–7841
Figure 11