Installation Instructions

 2004—The Toro Company

8111 Lyndale Ave., Bloomington, MN 55420, USA

Printed in the USA

Original Instructions (EN)

Replacement Shroud Kit

2002 and After CCRt 2450 and 3650

North American Snowthrowers

Part No. 108-5050

Form No. 3352-114 Rev B

Installation Instructions

Removing the Existing Lower

Shroud from the Snowthrower

1. Remove the 2 bolts that secure the existing lower

shroud to the snowthrower.

Note: Save the bolts you removed to secure the new

lower shroud onto the snowthrower.

m–7757

2. Pull the top of the shroud to the rear until the

choke lever (A above) clears the slot.

3. Remove the shroud.

4. Remove the rubber choke shield from the choke

lever and discard the shield.

Installing the New Lower Shroud

onto the Snowthrower

1. As you install the new lower shroud onto the

snowthrower, guide the choke lever through the slot.

2. Secure the new lower shroud with the 2 bolts you

previously removed.

Note: Ensure that the lip of the new lower shroud (A)

tucks into the cross tube (B) of the snowthrower.

m–7756

PAGE 1
Replacement Shroud Kit Form No. 3352-114 Rev B 2002 and After CCRt 2450 and 3650 North American Snowthrowers Part No. 108-5050 Installation Instructions Removing the Existing Lower Shroud from the Snowthrower Installing the New Lower Shroud onto the Snowthrower 1. Remove the 2 bolts that secure the existing lower shroud to the snowthrower. 1. As you install the new lower shroud onto the snowthrower, guide the choke lever through the slot.
PAGE 2
Kit carénage de rechange Form No. 3352-114 Rev B 2002 et après CCRt 2450 et 3650 Déneigeuses pour l’Amérique du Nord Réf. 108-5050 Instructions d’installation Dépose du carénage inférieur existant de la déneigeuse Pose du nouveau carénage inférieur sur la déneigeuse 1. Retirez les 2 boulons qui fixent le carénage inférieur existant à la déneigeuse. 1. Lorsque vous installez le nouveau carénage inférieur sur la déneigeuse, faites passer la manette de starter à travers la fente.