Installation Instructions

Printed in the USA

W 2005 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

PTO Frame Repair Kit

Groundsmaster

)

300 Series

Part No. 108–8684

Form No. 3353–403 Rev. A

Installation Instructions

1. Remove the radiator and the radiator support to gain

access to to the rear PTO mount (Fig. 1).

Figure 1

1. Rear PTO mount

2. Loosen PTO shaft so it can be removed from the

bushing in the mount (Fig. 1).

3. Cut off the corner of mount to remove the bushing

(Fig. 2).

Figure 2

1. Cut this off

4. Make sure mount is free or all dirt and grease. Remove

all burrs and paint from the mount.

5. Clamp the new PTO mount onto the front of the

existing mount while aligning the left and bottom

edges (Fig. 3 & 4).

Figure 3

6. Weld the edges of the new mount to the existing

mount.

Figure 4

7. Reinstall PTO shaft, radiator support and radiator.