Installation Instructions

Form No. 3355-317 Rev A

Hitch Tow Bar Kit

For Sand Pro® 3040 and 5040 Traction Unit

Model No. 110–1375

Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.

Installation

Step

Mounting the Tow Bar

Parts needed for this step:

Tow bar assembly

Procedure

Note: T he hitc h to w bar kit is used in conjunction

with the attac hment adapter on a tooth rak e or

rear broom. A Lift Ar m Adapter kit, P ar t No .

108-9427 ma y be obtained for use instead of using

the attac hment adapter .

1. Lo w er the attac hment to the g round.

2. Disconnect any attac hment c hains from

the attac hment adapter ( Figure 1 from the

attac hment adapter .). T he lift ar m does not

need to be remo v ed from the attac hment

adapter .

Figure 1

1. Attachment chains 2. Attachment adapter lift arm

3. R emo v e the clevis pin securing the attac hment

to the attac hment adapter ( Figure 2 ).

Figure 2

1. Attachment adapter 2. Attachment

8111 Lyndale Avenue South

Bloomington, MN 55420

Printed in the USA.

PAGE 1
Form No. 3355-317 Rev A Hitch Tow Bar Kit For Sand Pro® 3040 and 5040 Traction Unit Model No. 110–1375 Installation Instructions Note: Determine the left and right sides of the machine from the normal operating position. Installation Step 1 Mounting the Tow Bar Parts needed for this step: 1 Tow bar assembly Procedure Note: The hitch tow bar kit is used in conjunction with the attachment adapter on a tooth rake or rear broom. A Lift Arm Adapter kit, Part No.
PAGE 2
Operation 4. Mount the hitch to the attachment adapter with the 2 clevis pins and cotter pins included in the kit (Figure 3). Training Period Maximum GVW (Gross Vehicle Weight) is 1539 lb. (698 kg). This weight includes all attachments mounted on the traction unit. The tongue weight should be about 10 to 15% of the Gross Trailer Weight. Use the following table as a guide to determine maximum trailer weight. Maximum Trailer Weight No attachments 410 lb (186 kg) Front plow 307 lb.