Installation Instructions
Table Of Contents
- Side Discharge or Mulch Grass
- 1 Preparing the Mower
- 2 Removing the Existing Blades
- 3 Removing the Existing Baffles
- 4 Installing the Discharge Plate
- 5 Installing the Baffles
- 6 Installing the New Blades
- Selecting the Proper Height-of-Cut
- Mowing in Extreme Conditions
- Mowing at Proper Intervals
- Mowing with Sharp Blades
- After Operating
![](/manual/toro/110-2080/installation-instructions-english/images/img-1.png)
FormNo.3373-828RevA
36inRecycler
®
Kit
TURBOFORCE
®
CuttingUnitforMid-SizeMowers
ModelNo.110-2080
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
Safety
SideDischargeorMulchGrass
WARNING
Withoutthegrassdeector,dischargecover,or
completegrasscatcherassemblymountedin
place,youandothersareexposedtobladecontact
andthrowndebris.Contactwithrotatingmower
blade(s)andthrowndebriswillcauseinjuryor
death.
•Neverremovethegrassdeectorfromthemower
becausethegrassdeectorroutesmaterialdown
towardtheturf.Ifthegrassdeectorisever
damaged,replaceitimmediately.
•Neverputyourhandsorfeetunderthemower.
•Nevertrytoclearthedischargeareaormower
bladesunlessyoudisengagethepowertakeoff
(PTO)leverandturntheignitionkeytooff.
Alsoremovethekeyandpullthewireoffthe
sparkplug(s).
Ensurethemowerhasthehingedgrassdeectorthat
dispersesclippingstothesideanddowntowardtheturf,
whileinsidedischargemode.
Tomulchgrassclippings,thebafesmustbeinstalledinto
themowerasshowninthefollowingsteps.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3373-828*A