Installation Instructions

Form 3353-651 Rev A
05-10513
4-7-05
Rear View Mirror Kit
Workman 3000/4000
2004 and up
Part No. 110-2510
Note: To attach Mirror Kit, you must have a cab, (Model No. 07319 or 07323)
installed on vehicle.
The following kit comes with the following;
(4) 110-2506 Mirror Mount Bracket
(1) 110-2504 LH Mirror Arm
(1) 110-2503 RH Mirror Arm
(2) 110-2505 Britax Mirror
(2) 3274-94 Soc Hd Screw 5/16-18unc
(2) 32128-40 Hex Nut Sur Flange 5/16-18unc
(1) Mounting Instructions 3353-651
1. Place arm and mount bracket onto profile tube and secure using bolt and nut.
Position bracket 12” below the roof line.
2. Install mirror onto arm and tighten mirror.
3. Sitting inside the cab, adjust mirror(s) until proper vision is desired. Ensure
that mirror(s) do not obstruct the door opening and closing.
12”