Installation Instructions

Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
No parts required
–
Preparing the machine.
2
No parts required
–
Remove the splash guard and
selector assembly.
3
No parts required
–
Prepare the frame.
4
No parts required
–
Drilling shift lock out cable holes.
Selector mounting bracket
1
Bolt (5/16 x 1 inch)
2
Lock nut, serrate ange(5/16 inch)
2
Shift selector assembly
1
Bolt (5/16 x 2-1/2 inch)
2
Spacer 2
Flat washer
2
Lock nut, nylon (5/16 inch)
2
Clevis pin (3/8 x 1-1/8 inch)
1
Cotter pin
1
R-clamp
2
Rubber grommet (1-1/2 inch)
1
Rubber grommet (3/4 inch)
1
5
Rubber sleeve
1
Mount the shift selector assembly.
6
No parts required
–
Install the belt kit (Part of Second
Kit).
7
No parts required
–
Install the splash guard.
Bracket, offset
1
Bolt (1/4 x 5/8 inch)
3
8
Lock nut, serrated ange (5/8 inch)
3
Install the shift selector cables.
9
No parts required
–
Adjust the lock out cable.
10
No parts required
–
Adjust the shift selector cables.
11
No parts required
–
Finish the installation.
2