Installation Instructions

Figure 2
1. Flange Nut 3. Rear discharge rubber deector 5. Bolt
2. Mower deck 4. Stiffener
Step
3
Installing the Bafes
Parts needed for this step:
1
Left bafe
1
Center bafe
1
Right bafe
14
Carriage bolt, (5/16 x 7/8 inch)
15
Flange nut, (5/16 inch)
1
Carriage bolt, (3/8 x 1 inch) (For 72 mowers
only)
Procedure
Note: All holes exist in the mo w er dec k for
installing the new baffles .
Note: Loosely install the baffles to align the
baffles with all existing holes in the mo w er .
1. Install the right baffle into the mo w er .
2. Loosely install the right baffle to the mo w er
dec k with 5 bolts (5/16 x 7/8 inc h) and 5
flang e n uts (5/16 inc h) ( Figure 3 and Figure 4 ).
3. Install the center baffle into the mo w er .
4. Loosely install the center baffle to the mo w er
dec k with 5 bolts (5/16 x 7/8 inc h) and 5
flang e n uts (5/16 inc h) ( Figure 3 and Figure 4 ).
5. Install the left baffle into the mo w er .
6. Loosely install the left baffle to the mo w er
dec k with 4 bolts (5/16 x 7/8 inc h) and 4
flang e n uts (5/16 inc h) ( Figure 3 and Figure 4 ).
3